Humidifier Controllers

Easy to install, the Humidistat HR-HRSA will help you to control the relative humidity in your grow room - vital if you want healthy plants!..

3-in-1 Temp/Humid/Light sensor for the Hydro-X system.Note: This is a replacement or spare part. The main controller comes with a sensor already."Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"FeaturesBuilt..

The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.Features:LED Power Indicato..

CONTROL OVER DIFFERENT DEVICES FOR BOTH DAY & NIGHT.This range of day & night controllers have been developed to control heaters, humidifiers and dehumidifiers for both day and night.The Heater Control version is for use with your existing heater. Use the dials to set specific temperature fo..

Beta-6 Digital Day/Night Humidity Controller offers indoor gardeners an economical and simple method of monitoring and controlling humidity level within the grow area.Beta-6 will turn on / off humidity equipment based on user-programmed day & night settings. LED Display, Easy..

The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal.The TSH-1 is capable of c..

To control your humidifier the best and most accurate way is to use the Digital Humidistat HR-DHTC by FaranThe easy to use device has two outputs. The first output will control either a HR-15 or HR-50 humidifier, or a dehumidifier. The second output will control a heater or air-conditioning unit.Pow..

HAWKEYE is a new generation of climate monitor and logger. With a free smartphone App, you could monitor the growing environment (temperature, humidity and CO2 PPM) of your grow room anytime anywhere.Features:LED Display, Easy OperationTemperature / Humidity / CO2 (PPM) 3-in-1 sensorSmartphone APP A..

The SonicAir Pro Intelligent Humidity Controller is powered from the humidifier. The unit switches the humidifier on and off but leaves the humidifier fan to overrun. This protects your humidifier.  • Humidifier controller • Intelligently learns to maintain the perfect humidity • Day and..

The Intelligent Humidity Controller monitors your grow room environment and controls the humidity levels to VPD, vapor pressure deficit, or relative humidity. Months of research have gone into the Intelligent Humidity Controller – it calculates the vapor pressure deficit on the leaves of your p..

The Hydro-X system is a professional-grade single zone environmental system. It is fully customizable and modularly designed. Installation is simple and the system is easy to expand upon. The Hydro-X system can control most grow lights brands, HVAC systems, mini-split air conditioners, commercial de..

The GAS Enviro Controller will control every aspect of your grow room environment. Controls your grow room temperature and humidity by increasing or decreasing your fan speeds. There are day and night settings and a dump feature for closed looped environment.AC Fans to a maximum 2200 watts ..

The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for both Hydro-X Pro and Hydro-X Plus systems.Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO c..

TrolMaster continues the revolution with a 10’ touch-screen and a web-based software. The Hydro-X Pro also backwards compatible with all current Hydro-X control / device modules. It provides greater flexibility and allows any plug-in module to be addressed to be whatever the user wants. The user can..