The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using ..
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. ..
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols...
Take the headwork out of optimising your garden with the Easy Controller - an analogue multi-channel controller for HELLION LED fixtures! Simply power up, pick your photoperiod, dial in the perfect spectrum and you’re good to grow! When we say EASY, we really mean it!Control Up To 100 FixturesAdjust..
The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the ..
3-in-1 Temp/Humid/Light sensor for the Hydro-X system.Note: This is a replacement or spare part. The main controller comes with a sensor already."Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"FeaturesBuilt..
The Gavita RS1 Remote Switch is a manual light intensity controller. It can be used to switch, dim or boost one or multiple linked fixtures at once. Easily adjust the light intensity of the lamps by just rotating the knob. The RS1 allows you to dim your lamps down to 60% or even boost your lamps up ..
The PowerPlant Controller is designed to make controlling your grow-lighting easy – even on a large scale. Combining the power of a timer and a temperature-sensitive failsafe, you can easily programme and adjust a day/night lighting schedule, and protect your plants from heat stress by program..
The Maxi Controller is a modular control system for controlling the DimLux lighting system, a fan and the heating. The Maxi Controller controls and monitors the CO2, Vapor Pressure Deficit (VPD) and the plant temperature depending on the sensors chosen.The Maxi Controller is able to co..
The DLM-4 Zone Controller is specially designed to set up a Daily Lighting Management system for your Dutch Lighting Innovations fixtures. DLI-JOULE-1000W-DE-120-240V-FIXTURE The DLM-4 Zone Controller can be connected to up to 4 separate zones of DLI lighting fixtures. Each zone ca..
Precise and versatile lighting control, right at your fingertips! The new DAYLIGHT Lighting Controller has been designed and manufactured to power your grow lights, whether you are using CMH or LED technology. Whether you want functionality like sunrise/sunset options, dimming on overheat or simply ..
JUNO LED lighting controller for ultimate control over your grow light. This LED fixture offers the same uncompromising level of quality and performance that you would expect from all Maxibright products.• Two zones (A & B) controlled independently • Control for 400 HID ballasts o..
The Omega Matrix is a compact and powerful controller used to efficiently connect lighting equipment. 24 hour timer
Show output as as W or %
Select ballast type: 315 - 1000W
Auto-dim at set temperature
2 outputs (main and aux)
2 temperature sensors
Lighting control at your fingertipsUsing a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation, and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram,'), set the dials on..
Raw power and lighting intensity is nothing without smart control. That’s why we concurrently developed the world’s smartest grow light controller—the RLC-1. While the DEva can work with your existing lighting controller, the RLC-1 can simulate sunrise and sunset, gradually warming up your plants ju..
The LUMATEK Control Panel is a digital lighting controller that offers outstanding control over your lighting kits. Using highly innovated technology, this controller smartly monitors your room temperatures, light timing, automation, safety control and dimming. Simply connect it to your LUMATEK Cont..
Control all your lights and extraction from one unit.The EL F controllers are new to the Gavita family. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control, based on a PID algorithm:0-10V EC f..
Lighting control at your fingertipsUsing a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation, and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram,'), set the dials on the..
The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases..
Coming soon register your details for the first drop by adding detail on ask question box.The Gavita™ EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. An 8-inch touchscreen interface provides a clear and colourful display...
TrolMaster continues the revolution with a 10’ touch-screen and a web-based software. The Hydro-X Pro also backwards compatible with all current Hydro-X control / device modules. It provides greater flexibility and allows any plug-in module to be addressed to be whatever the user wants. The user can..