DiffuseAir efficiently mixes all the air in your grow room. DiffuseAir offers you total control over the climate of your grow room. It eliminates microclimates, high humidity zones and hot spots. Designed and made by Systemair. DiffuseAir eliminates harsh air streams that can cause wind burn to your plants and salt accumulation in the growing media.
Being ceiling hung DiffuseAir gives you more floor space for growing.
Ceiling hung for more grow space
Improved environment = improved yields
Comes with 4 x hanging brackets, 4 x screws (for securing the unit to your RVK)
The DiffuseAir system will pull air in from the top of your room and push it out above the canopy, moving the air between the grow lights and the plants. This approach is ideal for reducing temperature microclimates in both ventilated and closed-loop grow rooms. If you have a square grow room, one centrally mounted DiffuseAir system can replace all other air movement fans.
The DiffuseAir system can be used as the distribution point for your fresh input air supply, mixing all the air in your grow room. Simply attach ducting to the fan and pull the air from your desired location, such as fresh air from outside. This allows the DiffuseAir to act as your climate cooling intake fan, distributing CO2 rich air right where your plants need it.
Too often, growers run into problems with air movement across larger rooms. Oscillating fans are often pointed at plants causing unnecessary movement of air across the leaves; this forces higher rates of transpiration which can lead to problems such as wind burn and salt accumulation in the growing media. Positioning the DiffuseAir in multiple places above the plant canopy will evenly distribute air, reducing hot spots and humidity pockets.
These are going to be the next big thing - get the same quality flowers from CMH Daylight Spectrum lighting but get even BIGGER yields using now 600 WATTS!
Sometimes called CMH (Ceramic Metal Halide) grow lights, CDM (Ceramic Discharge Metal-Halide) lamps give out an intense full spectrum of light that plants love.
What is a CMH Light?
Firstly, if you’re not familiar with what the acronym CMH stands for; its Ceramic Metal Halide. Which might not mean a great deal to you, so let’s delve a little deeper.
Without getting too scientific, the basic principle behind CMH lights is that they are constructed out of a ceramic compound rather than a more traditional quartz. This allows the lamp to reach a higher temperature than a HID lamp, which creates an excellent blend of the gases that ultimately provide a fuller light spectrum, which in turn provides a higher yielding, higher quality plant. The lamp itself though does not get hotter than a HID and in fact will be cooler.
SOLACURE FULL FIXTURE UVR8 FLOWER POWER-BOOST OIL PRODUCTION
Just run 2 to 8 hours a day, depending on how close you are to the plants and the strain you are growing. The are designed to be run at the same level as your hood, so no blocking light. They have their own built in reflector inside the bulb and are guaranteed to increase oil production by 15% to 30%. These aren't the weak little UVB lights that all-purpose companies sell, they are 5 to 10 times stronger and designed for professional growers.
Trust us on this: Lamps should be used for the entire flowering season for maximum trichome production and maximum resin production. Lamps are good for up to 3 full flowering seasons.
Lamps are also PROVEN to kill powdery mildew and mold. The Flower Power can do this because it produces light in the 280nm-300nm region, something no other UVB light can do, yet is safe for plants.
By adding supplementary UVB light into an indoor growing environment, growers can artificially stimulate the plant to produce more compounds to protect itself from the increased uvb this response can really benefit significantly.