EC Fans are now the most efficient and cost-effective extraction fans on the market, utilising digital commutation to precisely and efficiently regulate fan speed without the buzz or hum often found with older AC motor technology.
Next Generation "Multi-Phase" EC Motors use up half the power and produce half the heat compared to traditional DC motors. This results in greatly reduced energy costs coupled with less wear, greatly increased reliability and a longer expected lifespan than previous technology. They're also a lot quieter, so us here at Hytec can't recommend them enough - they're simply now a must for all grow rooms.
HyperFans
HyperFan's Laminar Flow Fan Blade & Stator Technology creates optimal airflow, similar in design to an aeroplane jet engine. The result is very high M³/HR and exceptional static pressure performance. The HyperFan Stealth delivers the highest M³/HR per watt of any silenced fan in the industry. The same state-of-the-art digitally controlled electronically commutated motor (ECM) and heavy-duty sealed ball bearings which make the original HyperFan so reliable and quiet, are combined with a silencing canister and lightweight acoustic foam in the Stealth series. This results in a reduction of 15DBAs which is perceived to the human ear as 75% quieter. Like the original HyperFan, the Stealth fans use 50% less power than traditional fans. A speed controller and integrated mounting brackets are included.
Phresh Hyper Fan Climate Controller
- Extremely simple to use just set two dials and forget
- Lowest energy use of any fan/filter controller system
- Thermostatic changes the fans rpm speed as needed
- Constantly maintains the optimal day time temperature
- Fan speed fall back to custom set RPM on cold nights
- 3 to 2 pin adapter included for series 1/2 hyper fans
- Y piece included for two fans
- Simple and easy to use, the hyper fan climate controller is a fully digital climate controller designed for use with the phresh filter hyper fan.
6" Silenced Hyper fan 535 M³/HR
Hyper Fan's Laminar Flow Fan Blade & Stator Technology create optimal airflow similar in design to an airplane jet engine. The result is very high M³/HR and exceptional static pressure performance. The Hyper Fan Stealth delivers the highest M³/HR per watt of any silenced fan in the industry. The same state-of-the-art digitally controlled electronically commutated motor (ECM) and heavy-duty sealed ball bearings which make the original Hyper Fan so reliable and quiet, are combined with our silencing canister and lightweight acoustic foam in the Stealth series. This results in a reduction of 15DBA s which is perceived to the human ear as 75% quieter. Like the original Hyper Fan, the Stealth fans use 50% less power than traditional fans. A speed controller and integrated mounting brackets are included.
Features
EC digital brushless motors are quieter, operate at lower temperature, are energy efficient & reliable.
High Pressure Laminar Air Flow/Taper Blade & Stator Technology
Multi-phase Technology
Soft Start Technology
Heavy Duty Sealed Bearings & Shorter Motor Shaft for smooth operation.
Volume air flow of 315CFM or 149L/s
REVOLUTION EC VECTOR
• EC-motors, high level of efficiency
• Low SFP values
• 100% speed controllable
• Integrated motor protection
• Can be installed in any position
• Compact design
• Low sound level
EC fans are intelligent devices using integrated motor electronics, ensuring that the motor always runs at optimal load. With EC motors the proportion of energy utilized effectively is higher, which as a result reduces the energy usage considerably, compared with AC motors.
Another special feature of EC fans is their energy-saving potential not only at full load, but especially when speed controlled, i.e. at part load. When operating at part-load, the energy used is much lower than with an asynchronous motor of equivalent output.
Reduced energy usage guarantees a drop in operating costs.
G.A.S Revolution EC Vector inline fan controller
Gas digital EC fan controllers have been specifically designed to control the revolution vector fan range. They control the fans correctly through 0-10 volts.
- No humming from the fans
- Save on power cost
- Precise climate control
- Shows minimum and maximum temperature
- Switch between Celsius and Fahrenheit
- Plug directly onto Vector EC fans
There are different ways of using the controller and its accessories depending on how many fans you need to control, for example:
1 Fan - Simply connect the fan to the controller using a male to male connection lead.
2 Fans - Connect both fans to a Y splitter, then to the controller. If these fans are being used for both intake and extraction, use different size fans to achieve negative pressure.
Fans with balance control - Connect Digital EC Balancer to the fan controller and the fans to the balancer, now you are able to fine tune and optimise your fans to achieve the negative pressure you desire.
Can Q-Max EC Fan
The silenced Can Q-Max EC fan incorporates the Max Fan Pro Series EC range into a foam-insulated metal casing.
These easy-to-install fans have the highest aerodynamic efficiency due to the new EC technology motor and the 3D rotor stator system - they provide a uniform, turbulence-free air-flow.
The plug and play Can Fan EC controller allows continuous control of the motor for up to 10 Q-Max EC fans. They are supplied with metal mounting brackets.
